Controllino Mega Industrial PLC Arduino 100-200-00

Description

Controllino Mega Industrial PLC, ATmega2560 CPU, Arduino open source, Serial TTL interface, I2C, SPI, RTC. 5x digital inputs (I16, I17, I18, IN0, IN1), Analog/digital inputs 16x (A0-A15), Digital outputs 12x Half -Bridge - 2A @ 12V or 24V (D0-D15) + 12x High Side Switch - 2A @ 12V or 24V (D12-D23), outputs 15x PWM (D0-D11, D14-D16)
Features:
Microcontroller:ATmega2560 from Atmel, Clock Speed @ 16MHz | 100% Arduino compatible
Analog/Digital Inputs: 21
Interrupt Inputs: 2
Digital 2A Outputs: 24 (15 PWM)
Relay Outputs: 16
Serial TTL Interface: 2
I2C Interface: 1
SPI Interface: 1
RS485 Interface: 1
RTC (Real-time clock): 1
Ethernet Interface: 1
Technical data
General
Standard
EN61010-1
EN61010-2-201
EN61131-2
Dimensions (W × H × D)
107x90x62mm
Weight
350g
Mounting
Top hat rail EN50022, 35mm
Environmental conditions, Indoor use only
Operating ambient temperature
0°C – 55°C
Relative humidity – non-condensing
80 % for temp. up to 31 °C, decreasing linearly to 50 % relative humidity at 55 °C
Pollution Degree
PD2
Altitude
up to 2000m AMSL
Vibration (5 = f = 9 Hz)
Vibration (9 = f = 150 Hz)
1,75 mm amplitude sinus
3,5 mm amplitude random
0,5 g acceleration sinus
1,0 g acceleration random
Transport and Storage
-20°C – +70°C
10 to 90% no condensation
Altitude 3000m AMSL
Shock response
15g, 11ms half sinus all 3 axes
I/O
Supply voltage
12V or 24V
USB (Power for programming only)
USB-B, 2.0
Ethernet
RJ45, 10/100Mbps
RS485 (no termination inside)
250kb
Inputs, no galvanic insulation
Common analog/digital
Fixed digital, ext. Interrupt usable
21
16
5
Digital Outputs, no galvanic insulation
Relay output
24
16
PIN Header, no Galvanic insulation
Logic level Input
Logic level Output
Communication
Internal Power
21 parallel to terminal Inputs
24 parallel to terminal Outputs
SPI, 2xUART, I2C, Reset
+3,3V, +5V, ARef, GND
Terminal capacities
Relay Output, Power Input
Strip length
Max. tightening torque
2,5mm² (24-12AWG)
6-7mm
0,5Nm
Digital, Analog Input Output
Strip length
Max. tightening torque
1,5mm² (30-16AWG)
5-6mm
0,2Nm
Pin header connector
2x 26 Pin, Dual row, 2.54 pitch
Protection
ESD HBM Class 0
Contact discharge: ±4kV
Air discharge: ±8kV
Supply input over current protection
Internal Fuse 30A (fast)
Relay Output
External Fuse required
Digital Output
Overload, short circuit, ESD
Signal Input
Overvoltage, ESD
Pin header connector
Current +5V, +3,3V
ESD
total 200mA, resettable fuse