PLC Controller Board For Mitsubishi FX3U LK3U-32MR Relay Output 0-10V Input

Description

Description
PLC Controller Board For Mitsubishi FX3U LK3U-32MR Relay Output Standard Version 0-10V Input
Features:
- Controller for Mitsubishi FX3U
- Support 8-axis pulse
- 32,000 steps
- Programming method: use programming software for Mitsubishi, the model selection is FX3U, the baud rate is 19200, and the download line is USB to 232. The driver can be installed using device for DriverGenius
- High degree of encryption
- Stable performance, good compatibility, wide application
- PLC function layout is reasonable, and the module uses terminal wiring, and the analog quantity is stable and does not jump.
- High-speed chips ensure smooth operation of equipment
- With indicator lights
- Installation method: DIN35 rail installation, 5mm screw mounting holes
Introduction:
- Dimensions: 190 x 117 x 56 mm
- Hole Spacing: 190.4 x 116.4 mm
- Input: 16
- Relay Output: 16
- Transistor Output: None
- AD: 10
- DA: 2
- High-Speed Input: 2
- High-Speed Output: None
Functions of Standard Version:
- Analog Quantity:
* AD: Input 0-10V.
* DA: The output is compatible. Connect G-, V+ is 0-10V output. Link G-, I+ is 0-20ma output.
- Communication Port:
* 1-way 232: 9-pin serial port definition: 2 (TXD send), 3 (RXD receive), 5 ground, support programming port protocol for Mitsubishi, download programs, connect various touch screens, etc.; 10 meters communication.
* 2-way 485: Interface definition: A, B, ground. Support programming port protocol for Mitsubishi, for Modbus rtu/RS protocol, can be connected to various touch screens, inverters, etc.; the longest communication distance is 1000 meters.
- High-Speed Pulse:
* High-speed input: Default 2 high-speed input. X0: 60khz; X 1: 10khz.
General Parameters:
- Model: LK3U-32MR
- Installation method: DIN35 rail or screw fixed
- Operating temperature: 0°C to 50°C
- Storage temperature: 20°C to 60°C
- Operating humidity: 10%RH~90%RH (no condensation)
- Air requirements: non-corrosive, no dust
- Working voltage: DC24V±10%
- Working current: Depend on the specific model, >1A
- Programming software: For GX-Developer/GX-Works2
- Maximum program step: 32000 steps
- Communication port 0: RS232: program download, HMI communication; programming port protocol, the default baud rate is 19200.
- Communication port 1: RS485: HMI communication, communication of various instruments; default programming port protocol, default baud rate 19200, optional protocol for MODBUS-RTU/RS/RS2.
- Communication port 2: RS485: HMI communication, communication of various instruments; default programming port protocol, default baud rate 19200, optional protocol for MODBUS-RTU/RS/RS2.
- Communication port 3: CAN: PLC expansion port, which can be connected to our producers' IO expansion module.
- Digital quantity input: DC24V NPN leakage pattern
- Digital quantity output: Relay: dry contact (AC250V/DC30V; 3A)
- Analog quantity input: 0-10V.
- Analog quantity output: Output is compatible. Connect G-, V+ is 0-10V output. Link G-, I+ is 0-20ma output.
Package Included:
- 1 x Set of PLC Controller
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Aug-31-20 at 20:51:15 PDT, seller added the following information: